|
 Page
Results:
PAGE 1 | 2 |
> | >> |
|
 |
Eight Carving Tools
Collection of eight unnamed beech handled carving tools with brass ferules. Handles are marked with the previous users name stamp. Collection comes complete with bit roll and includes the following carving tools:
1 x 13mm Spoon bit gouge,
1 x 9mm Spoon bit gouge,
1 x 7mm vee tool,
1 x 14mm shallow curved gouge,
1 x 16mm shallow straight gouge,
1 x 10mm very shallow straight gouge,
1 x 8mm deep straight gouge,
1 x 5mm deep straight gouge.
Model: --
Condition: G+
Tool Manufacturer: unnamed
Delivery: D
Price : £68.00 |
|
| |
 |
SOLD Marples Carving Tools
Three mahogany handled carving tools made by Marples. Collection includes:
1 x 13mm spoon gouge, (marked with previous users name stamp),
1 x 12mm vee tool (some staining and pitting to blade),
1 x 5mm vee tool .
Model: --
Condition: G++
Tool Manufacturer: Marples
Delivery: A
Price : £30.00 |
|
| |
 |
SOLD Six Ashley Iles Carving Tools
Collection of six carving tools made by Ashley Iles. Handles have been marked with the previous users name stamp. Collection includes:
1 x 24mm curved gouge,
1 x 19mm curved gouge,
1 x 4mm curved gouge,
1 x 23mm spoon gouge,
1 x 21mm spoon gouge,
1 x 4mm spoon gouge.
A fine collection of carving tools that have seen only light use.
Model: --
Condition: F
Tool Manufacturer: Ashley Iles
Delivery: D
Price : £72.00 |
|
| |
 |
Collection of Carving tools
Collection of five carving tools includes:
1 x 19mm wide shallow gouge by Henry Taylor,
1 x 13mm straight chisel by Henry Taylor,
1 x 10mm skew chisel by Muller,
1 x 11mm deep gouge by Muller,
1 x 12mm very shallow gouge by Muller.
Model: --
Condition: G++
Tool Manufacturer: Henry Taylor and Muller
Delivery: B
Price : £42.00 |
|
| |
 |
SOLD J.B Addis Fishtail Gouge
A fine boxwood handled fishtail gouge marked J.B Addis & Sons Sheffield Eng, Prize Medal. Boxwood handle is marked with four previous users name stamps. A fine old tool.
Blade Width: 24mm (15/16”)
Overall Length: 280mm (11”)
Model: --
Condition: G++
Tool Manufacturer: J.B Addis |
|
| |
 |
SOLD Sorby Carving Gouges
A collection of five boxwood handled carving gouges made by Robert Sorby and I.Sorby. Boxwood handles are marked with the previous users name stamp. Collection includes:
1 x 13mm wide by Robert.Sorby,
1 x 12mm by I.Sorby
1 x 11mm by I.Sorby
1 x 9mm by Robert.Sorby,
1 x 6mm by Robert.Sorby.
On average these carving tools measure 256mm (10 1/16”) long overall.
Model: n/a
Condition: G++
Tool Manufacturer: Sorby |
|
| |
 |
SOLD 9 Henry Taylor Carving Tools
Collection of 9 carving tools made by Henry Taylor. Collection includes:
1 x 26mm curved gouge,
1 x 26mm very shallow curved gouge,
1 x 16mm very shallow curved gouge,
1 x 10mm very shallow curved gouge,
1 x 10mm very shallow straight gouge,
1 x 6mm very shallow straight gouge,
1 x 17mm spoon gouge,
1 x 13mm spoon gouge,
1 x 7mm spoon gouge.
Model: --
Condition: G+/G++
Tool Manufacturer: Henry Taylorr |
|
| |
 |
SOLD 15 Henry Taylor Carving Tools
Collection of 15 carving tools made by Henry Taylor, complete with carvers mallet and bit roll. Collection includes:
Four straight gouges, ten bent gouges and one vee tool. A nice collection with good clean blades.
Model: n/a
Condition: G+
Tool Manufacturer: Henry Taylor |
|
| |
 |
SOLD Mason's Carving Chisels by John Hall
Two masons carving chisels / gouges by John Hall, Cardiff. Includes:
1 x gouge 31mm (1 7/32") wide by 245mm (9 5/8") long,
1 x shallow gouge 34mm (1 5/16") wide by 240mm 9 7/16"
long.
Model: n/a
Condition: G+
Tool Manufacturer: John Hall |
|
| |
 |
Marples Carving tools
Four rosewood handled carving tools with brass ferules made by Marples. Collection includes:
1 x 11mm spoon gouge,
1 x 10mm spoon gouge (sides of handle have been sanded flat).
1 x back bent spoon gouge,
1 x 7mm fish tail (marked with the previous users name stamp).
Model: --
Condition: G/G+
Tool Manufacturer: Marples
Delivery: B
Price : £44.00 |
|
| |
 |
SOLD Addis and Marples Spoon Gouges
Three boxwood handled spoon gouges with brass ferules, collection includes:
1 x 13mm J.B Addis Prize Medals Spoon gouge,
1 x 10mm J.B Addis Prize Medals Spoon gouge,
1 x 7mm W.Marples & Sons Spoon gouge, dated 1943 and marked with the ministry arrow.
These old carving tools are marked with some slight staining to their handles and blades.
Model: --
Condition: G+
Tool Manufacturer: Addis and Marples |
|
| |
 |
SOLD I and H Sorby Spoon Bit Gouges
Two fine early mahogany handled carving tools y I & H Sorby, includes:
1 x deep spoon bit gouge 14mm wide by 250mm (9 7/8") long overall.
1 x shallow spoon bit gouge 14mm wide by 250mm (9 7/8") long
overall. Both tools have the previous users name stamp to handle.
Two nice carving tools with nice clean blades.
Model: n/a
Condition: G+/G++
Tool Manufacturer: I & H Sorby
Delivery: B
Price : £40.00 |
|
|
| Page
Results: PAGE 1 | 2 |
> | >> |
| |
