A drawing set with original case, has some slight ware to case.

Model: --
Condition: G++
Tool Manufacturer: --
Delivery: A
Price : £22.00

Collection of measuring tools, collection includes:
1 x Chesterman no. 1992 depth gauge, dated 1966 marked with ministry arrow/ 910-5194, rule is marked out in inches to one side and millimetre to reverse side. This tool is in very good condition
1 x Somet Vernier Callipers, face is marked out in millimetres and inches up to 190 millimetres. This tool is in very good condition
1 x micrometer marked Brown & Sharp MFG. CO. PROV. R.I. USA. This tool has some loss of finish to edges of the micrometer.

Model: --
Condition: G++
Tool Manufacturer: --

A large pair of dividers made by D. Kimberley & Sons. These old dividers are marked with some minor patches of pitting / black staining.

Height: 252mm (10”)

Model: --
Condition: G/G+
Tool Manufacturer: D. Kimberley
Delivery: B
Price : £38.00

A fine vernier calliper marked Etalon Proch Rolle Switzerland, Stainless tempered steel 20c. Measurements are marked out in inches and millimetres to face, reverse side is marked out in inches Come complete in original fitted wooden box.  

Model: --
Condition: F
Tool Manufacturer: Etalon
Delivery: D
Price : £120.00

A 9” pair of German silver proportional dividers marked Stanley London British Made, Plans, Solids, Lines and Lineal Ratios. Steel points are marked with some staining and minor pitting.

Length: 226mm

Model: --
Condition: G++
Tool Manufacturer: Stanley
Delivery: D
Price : £74.00

Speed indicator marked The L.S. Starrett Co. Athol Mass USA.

Model: --
Condition: G+
Tool Manufacturer: --
Delivery: A
Price : £16.00

Two early pairs of dividers, the larger pair measure 270mm (10 1/2") long overall and the smaller pair measure 190mm (7 1/2") long overall.

Model: --
Condition: G+
Tool Manufacturer: --
Delivery: D
Price : £80.00

Two screw plates marked A. Mathieson & Son. These old tools have some pitting mainly on the larger tool. The smaller screw plate measures 245mm (9 5/8”) long and the larger screw plate measures 303mm (11 7/8”).

Model: --
Condition: G
Tool Manufacturer: Mathieson
Delivery: B
Price : £28.00

An old pair of dividers made by Henry Osborn of Newcastle

Overall Length: 170mm

Model: --
Condition: G
Tool Manufacturer: --
Delivery: A
Price : £20.00

Three old screw plates, includes two boxwood handled screw plates with brass tops and ferules both marked RL along with the ministry arrow and measure 194mm long overall and the 145mm long overall. The unhandled screw plate is marked 9BA this little tool measures 76mm long overall.

Model: n/a
Condition: G/G+
Tool Manufacturer: --
Delivery: A
Price : £28.00

An old pair of dividers marked Melhuish London. E.C, the tool has some light pitting and measures 220mm (8 11/16”) long overall. A nice old collectable pair of dividers with good points.

Model: n/a
Condition: G
Tool Manufacturer: Melhuish
Delivery: D
Price : £68.00

A pair of beech gothic templates single and double, both of which are marked A.Mathieson & Son Glasgow & Edinburgh. There’s also a square template that is unmarked but we also believe this to be made by the same maker Alex Mathieson.

Model: n/a
Condition: G+
Tool Manufacturer: Mathieson
Delivery: B
Price : £24.00

A large 9” diameter brass faced spring balance. Brass face is marked “Salter 7268/B, made in England to weigh 100lb by 1/2lb Trade Spring Balance No 235T”. This old tool also has a crown mark stamped into a coin size piece of lead on the brass face of these Salter spring balance. Scales weigh from 0-100lbs.

Model: 235T
Condition: G/G+
Manufacturer: Salter
Delivery: E
Price : £45.00