Sold Items
767 items found in Sold Items
SOLD - Moseley Wooden Bead and Scotia Plane (Beech)
planes
- £0.00
A lovely old Moseley bead and scotia wooden moulding plane. The plane is marked on the front nose 'John Moseley & Son, 54-55 Broad St, Bloomsbury, London'. Plane Width: 53mm Cutter Width: 38mm (1 1/2") Condition: all parts move freely, please see photos for condition.
SOLD - Stanley Edge Trimming Plane No. 95
planes
- £0.00
An old Stanley 95 plane with a brass user-made block attachment. This old, increasingly scarce Stanley edge trimming plane was made in USA. This was Stanley's earliest model with the Patent mark. Retains a good length blade marked 'Stanley Rule & Level Co, New Britain Conn USA'. A good clean ...
SOLD - Old Keyzor & Bendon (London) Wooden Rule - 24" (Boxwood)
measuring tools
- £0.00
An old scarce Keyzor & Bendon imperial 24" Folding Rule. This old Keyzor & Bendon rule is marked 'Keyzor & Bendon, London, Best Box'. Condition: please see photos for condition.
SOLD - Small LSS Starrett Combination Square - 15cm (USA)
measuring tools
- £0.00
An old, small Starrett Adjustable Square with metric 15cm rule. The rule is marked 'The LS Starrett Co Co, Athol, Mass, USA, Hardened'. Stock Height: 2 3/4" Condition: all parts working smoothly, bubble intact, please see photos for condition.
SOLD - Wooden Tongue and Groove Plane (Beech)
planes
- £0.00
An old wooden tongue and groove plane. The rear is marked '3/8'. Groove Width: 4.5mm Groove Blade Width: 4mm Tongue Blade Gap Width: 4mm Condition: all parts move freely, please see photos for condition.
SOLD - Record Jack Plane No. 05 1/2 (Beech)
planes
- £0.00
An old Record Jack Plane No. 05 1/2 + additional full Stanley cutter (not shown in photos). For general information about this tool see the Record 05 1/2 Plane Review on FindMyTool.co.uk Condition: all parts move freely, the original cutter is short, please see photos for condition.
SOLD - Adjustable Square Stock With Angle Attachment
measuring tools
- £0.00
A lovely old adjustable Square Stock with an angle rule attachment. The stock has a bubble. Rule says 'Cutting Angle Of Countersink For Machine Screws' and 'Cutting Angle Of Drill' Stock Height: 88mm (3 1/2") This tool came from an old engineer, a lot of his tools appear to date to 1910's-1930's ...
SOLD - Small Moore & Wright Adjustable Square - 4" + Attachments (UK)
measuring tools
- £0.00
A lovely old little Moore & Wright Adjustable Square + attachments. Rule and angle attachments. Rule is marked out in inches up to 4” long. The stock is marked 'Moore & Wright, England, Sheffield, Hardened No 414'. Stock Height: 62mm This tool came from an old engineer, a lot of his tools...
SOLD - Small Brown & Sharpe Adjustable Square - 2 1/4" + Attachments (USA)
measuring tools
- £0.00
A lovely old little Brown & Sharpe Adjustable Square + attachments. Rules and angle attachment, 2 1/4” long. Rules are marked out in inches up to 2 1/4” long. The stock is marked 'Brown & Sharpe MFG Co, Providence, RI USA, BS Trade Mark, 554, Patent Pending'. Stock Height: 38mm This tool ...
SOLD - Old Small Lufkin Steel Rule No. 2707 - 4" (USA)
measuring tools
- £0.00
An Old Small Lufkin Steel Rule No. 2707 - 4" (USA) Marked 'No 2707, The Lufkin Rule Co, Saginaw, USA'. The rule is marked with a multitude of measurement markings with many different increments including some ultra fine increments. These tools came from an old engineer and his father before him, ...
SOLD - 2x Vandervell & Co Vee Blocks + 1x Clamp (London, UK)
Other Tools
- £0.00
2x Vandervell & Co Vee Blocks + 1x Clamp Marked 'CA Vandervell & Co Ld, London'. Dimension: 1 1/4" (32mm) x 1 1/4" (32mm) x 1 1/4" (32mm) Vandervell seems to be an old tool / parts makers for the motor industry. These tools came from an old engineer and his father before him, nearly all h...
SOLD - Old Starrett Dividers - 6 1/2" (USA)
measuring tools
- £0.00
Old Starrett Dividers - 6 1/2" These dividers have a moveable / removable spike which can be set to a different height or replaced with a pencil. Marked 'The LS Starrett Co, Athol, Mass, USA'. These tools came from an old engineer and his father before him, nearly all his tools have dated to 1910...
SOLD - Old Brown & Sharpe Interchangeable Spring Dividers (USA)
measuring tools
- £0.00
Old Brown & Sharpe Interchangeable Spring Dividers Comes with three sets of tips. These tools came from an old engineer and his father before him, nearly all his tools have dated to 1910's - 1930's (not 100% on date - in super condition) Overall Height Of Tallest: 11 1/2" (depending on tips) ...
SOLD - Old Heavy Duty 'Red Devil' Screwdriver No 1418 - 5 1/4" (Beech)
Other Tools
- £0.00
An old, super, heavy duty screwdriver, marked 'Red Devil, No. 1418'. Blade Length (to ferrule): 5 1/4" (7" with ferrule) Tip Width: 16mm (5/8") These tools came from an old engineer and his father before him, nearly all his tools have dated to 1910's - 1930's (I haven't researched the date of t...
SOLD - Old Stanley Level No. 313 - 24" + Brown & Sharpe Rule (USA)
measuring tools
- £0.00
Old Stanley Level No. 313 - 24" (USA) in a fitted wooden box with green baise lining. and Brown & Sharpe Rule - 24" (USA) The rule is marked 'Brown & Sharpe MFG Co, Providence, RI, USA, Tempered No 4, 300'. The rule is marked out in inches with edge's respectively in 1/8's, 1/16's, 1/32's...
SOLD - Edward Preston Spokeshave - Flat - No. 1390H
planes
- £0.00
Flat soled Edward Preston adjustable spokeshave no. 1390H. Retains its Edward Preston cutter though little life remains, also provided with a new replacement Ray Iles cutter. For general information about this tool see the Preston Spokeshave 1390H Review on FindMyTool.co.uk Condition: all parts...
SOLD - Old Stanley Sliding Bevel No.25
measuring tools
- £0.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info An old stanley sliding bevel no. 25 - 7 1/2" with Rosewood stock and brass parts. The stock is marked 'Stanley, Made In England, No 25 - 7 1/2'. Condition: please see phot...
SOLD - 2x Stanley Sliding Bevels No. 5025
measuring tools
- £0.00
2x Stanley Sliding Bevels No. 5025 - 10 1/2" & 7 1/2" For general info about these tools, see the Stanley Sliding Bevel No. 5025 review on FindMyTool.co.uk Condition: please see photos for condition.
SOLD - Early Stanley Jointer Plane No. 8
planes
- £0.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info A good example of an increasingly scarce early low knob Stanley Jointer Plane No. 8. This lovely old Stanley plane has Rosewood handles including a bulbous low front knob. T...
SOLD - Marples Wood Carving Tools Set (Mahogany)
CHISELS
- £0.00
A Marples Wood Carving Tools Set with leather tool roll and Joseph Marples wood carvers mallet. The set includes 8x Marples carving tools. Condition: please see photos for condition.
SOLD - 2x Old Very Small CAV Small Tools Vices (England)
Other Tools
- £0.00
2x old very small CAV Small Tools vices (England) / engineers vice clamps. Marked 'CAV Small Tools Ltd, England'. Overall Length: 97mm Sole Length: 77mm Condition: all parts move freely, please see photos for condition.
SOLD - Old Starrett Bench Block No. 129 (USA)
Other Tools
- £0.00
Old Starrett Bench Block No. 129 (USA). Marked 'The LS Starrett Co, Athol, Mass, USA, No 129' and 'Pat Jan 16 1923'. These tools came from an old engineer, a lot of his tools appear to date to 1920's-1930's. Overall Diameter: 3" Condition: a few bits of pitting to surface, please see photos for...
SOLD - Old Tiny G Boley Watchmakers Vice (Germany)
Other Tools
- £0.00
Lovely little, old Clock-makers / Watch-makers Vice by G Boley of Germany. Marked 'G Boley, Germany'. These tools came from an old engineer, a lot of his tools appear to date to 1920's-1930's and have been kept in very good condition. Overall Length: 4" Condition: all parts move freely, please ...
SOLD - Old Small Starrett Level - No. 135 - 2 1/2" (USA)
measuring tools
- £0.00
An old lovely little Starrett Pocket Level No. 135 - 2 1/2" Marked 'The LS Starrett Co, Athol, Mass, USA, No 135'. Condition: bubble in tact, please see photos for condition
SOLD - Rabone Chesterman Combination Square No. 1913
measuring tools
- £0.00
An old Rabone Chesterman Combination Square No. 1913. This square has a 300mm metric rule. This combi square has a working bubble and still retains its marking pin. Condition: all parts working smoothly, bubble in tact, please see photos for condition.
SOLD - LSS Starrett Adjustable Square No. 18 - 4" (USA)
measuring tools
- £0.00
A lovely old, small Starrett Adjustable Square No. 18 in amazing condition for its age. This small square has a rule marked out in inches up to 4” long with 1/8", 1/16", 1/32" and 1/64" increments. The rule is marked 'No. 18, The LSS Co, Athol, Mass, USA, Hardened No 4'. This tool came from an o...
SOLD - Ashley Iles Wood Carving Tool Set + Mallet (Beech)
chisels
- £0.00
Ashley Iles Wood Carving Tool Set + Mallet: 10x Ashley Iles Wood Carving Tools 14 Pocket Tool Roll Woodcarvers Mallet - 4" Condition: mallet head has shrinkage split, please see photos for condition.
SOLD - 5x Old Starrett 8" Long Punches No. 248 (USA)
Other Tools
- £0.00
5x Old Starrett Punches. Marked 'The LS Starrett Co, Athol, Mass, USA, No. 248'. This tool came from an old engineer, a lot of his tools appear to date to 1920's-1930's and have been kept in very good condition. Condition: please see photos for condition.