Shoulder Infill Planes
41 items found in Shoulder Infill Planes
Edward Preston Bullnose Rabbet Plane No. 1366
planes
- £125.00
A lovely little No.1366 bullnose rabbet plane RD 387163 made by Edward Preston. Has a good clean rosewood wedge. Condition: please see photos for condition.
Brass Shoulder Plane
planes
- £80.00
A vintage brass shoulder plane with hardwood wedge and infill. Plane width: 10mm Plane length: 130mm (5 1/8”) Condition: staining and light pitting to base, please see photos for condition.
User Made Shoulder Plane
planes
- £65.00
A 4 ¼” long probably user made shoulder plane with bulbous wedge made from beech. Width: 16mm Condition: has crack to front infill, please see photos for condition.
Dovetailed Spiers Of Ayr Smoothing Plane
planes
- £350.00
A lovely old dovetailed Spiers Of Ayr Smoothing Plane with original Spiers Of Ayr lever cap, cap iron and plane iron. Condition: all parts move freely, please see photos for condition.
Spiers Of Ayr Smoothing Plane
planes
- £295.00
An old Spiers Of Ayr Smoothing Plane with original Spiers Of Ayr lever cap, cap iron and plane iron. The plane iron has a date which either says 1840 or 1860, I think it says 1840, it also has the ministry mark. Condition: all parts move freely, please see photos for condition.
Slater Shoulder Plane - 1 1/2"
planes
- £165.00
A nice old Slater shoulder infill rabbet plane. The infill and wedge is made from Rosewood with a malleable iron body. The rear of the plane is marked 'H Slater, Meredith St, [something]well, London'. Condition: all parts move freely, please see photos for condition.
Norris No. 27 Bullnose Rabbet Plane
planes
- £450.00
A Vintage steel soled gunmetal no. 27 bullnose plane with rosewood wedge and fine mouth made by Norris, London. Norris plane were considered the Rolls Royce of planes. Blade is by Prestons. Body is marked with some denting. Please contact old tools if you would like to see higher resolution pho...
Infill Shoulder Plane
planes
- £75.00
An old infill shoulder plane with wooden infill and wedge. The plane has been repaired (please see photos). Plane width: 19mm (3/4”) Plane length: 9” Condition: the plane has a good old repair where it has been cracked on one side above the opening, please see photos for condition.
Norris No. 20R Gunmetal Shoulder Plane
planes
- £440.00
A lovely old Gunmetal shoulder plane no. 20R made by Norris, London. This well-made plane has a steel sole, good clean tight mouth, rosewood infill and wedge and retains the original Norris plane iron. Wedge, blade and plane body are all marked with same production number ‘1’. Norris is considere...
Shoulder Rabbet Plane
planes
- £80.00
An old shoulder plane with rosewood infill and wedge, has a E. Preston & Sons cutter that has a slot down the centre of the cutter. Rear of plane has a number of dents (see photo). Body is marked with some speckling of minor pitting / staining. This woodworking shoulder plane has a fine mouth...
Norris Bullnose Plane no. 25
planes
- £235.00
Norris no. 25 bullnose plane with tight mouth and a near full length Norris iron. Has some wear (see photos).
Decorative Brass Shoulder Plane
planes
- £320.00
A lovely fine mouth brass shoulder plane with steel sole and ebony infills. Sole width: 37mm, Sole length: 202mm (8”). Condition: please see photos for condition.
Brass Shoulder Infill Plane
planes
- £220.00
A lovely shapely brass shoulder plane with steel sole and decorative wedge. Blade width: 35mm, Sole length: 200mm (7 7/8”). Condition: Slightly rounded mouth, please see photos for condition.
Mitchell Brass Bullose Plane
planes
- £110.00
A vintage brass bullnose rabbet plane with ebony wedge made by Mitchell, London. Blade width: 25mm Condition: please see photos for condition.
Bullnose plane Rabbet Plane – Norris Style
planes
- £70.00
- £65.00
Fine mouth bullnose rabbet plane with Norris shaped body and oversized rosewood wedge. Has a short length I.Sorby blade. Blade width: 27mm Condition: body is marked with previous woodworkers name stamps. Please see photos for condition.
Shoulder Plane - Rosewood
planes
- £150.00
A good clean good quality shoulder plane with rosewood infills. Retains a near full length Hearnshaw cutter. Has a good tight mouth. Sole width: 32mm (1 ¼”) Sole length: 197mm Condition: please see photos.
Brass Shoulder Plane
planes
- £165.00
A brass shoulder plane with steel sole and rosewood infill and wedge. Condition: Blade has pitting to blade face, speckling of pitting to base, has chipping to mouth, please see photos for condition.
Spiers Ayr Shoulder Plane
planes
- £165.00
A fine mouth shoulder rabbet plane with rosewood infill and wedge made by Spiers Ayr. Snecked iron is marked Wm. Marples & Sons. Plane width: 19mm (3/4”) Plane length: 231mm (9”) Condition: Has some marks to body.Please see photos for condition.
Edward Preston Shoulder Plane
planes
- £215.00
Shoulder plane with rosewood infill and wedge made by Edward Preston. Has a full length A.Mathieson snecked iron. Sole width: 32mm Sole length: 207mm Condition: Plane is marked with previous users name stamps. Has some marks and dents to body. Please see photos for condition.
Steel Shoulder Plane
planes
- £120.00
A ¾” steel shoulder plane with rosewood infill and wedge. Has a snecked W.Marples & Sons plane iron. Condition: Plane is marked with the previous woodworkers name stamps, has some marks and dents, please see photos for condition.
Iron Shoulder Plane
planes
- £80.00
An old iron shoulder plane with mahogany infills. Has a short length I.Sorby plane iron. Sole width: 27mm Sole length: 189mm (7 ½” approx) Condition: Please see photos for condition.
Norris Shoulder Plane
planes
- £245.00
A Norris shoulder plane with Rosewood infills and William Marples & Sons blade. Front nose is marked ‘Norris London’. The rear of the plane body and the wedge are both marked ‘7’. The rear of the plane is also marked: ‘Geo.Ryan, 312 Euston Rd’ and ‘Patent Metal’. Width: 32mm (1 1/4") Condit...
Miniature Gunmetal Bullnose Plane
planes
- £90.00
A little gunmetal bullnose plane with tight mouth and a rosewood wedge. Width: 12mm (1/2”), Sole length: 54mm (2 1/8”) Width: 12mm (1/2”) Sole length: 54mm (2 1/8”) Condition: has a couple of cast marks, see photographs for condition.
Small Iron Shoulder Plane
planes
- £96.00
A lovely little 4” long iron shoulder plane with rosewood infill and wedge. Plane has a good length snecked iron stamped ‘C.F.Johnson’. Has a fairly tight mouth. Width: 12mm Length: 102mm (4”) Condition: scratches to sole, minor speckles of pitting to sides, very slight rounded corners to mouth...
Buck Brass Bullnose Plane
planes
- £280.00
A brass bullnose plane with steel sole and ebony wedge made by Buck. Plane has a good length cutter with clean blade face. Width: 28mm Length: 94mm (3 ¾”) Condition: has some denting to brass body and previous woodworkers name stamp to wedge, see photographs for condition.
Iron Bullnose Plane
planes
- £54.00
A shapely cast iron bullnose plane with Norris style rosewood wedge. Has a short length blade, stamped ‘From C.Pool’. Condition: short length cutter with clean blade face, has pitting to bevelled side, plane is stamped with the previous woodworkers name stamp, body is marked with patches of pitti...
Small Brass Shoulder Plane
planes
- £120.00
Lovely 5 inch long brass shoulder plane with walnut wedge and infill. Plane is fitted with a good length plane iron. Sole width: 12 1/2mm (1/2”) Sole length: 128mm (5”) Condition: see photographs for condition.
Spiers Dovetailed Shoulder Plane
planes
- £195.00
Dovetailed shoulder plane with rosewood infills and wedge made by Scottish maker Spiers. Blade is Stamped ‘Ward, cast steel’. Sole width: 38mm (1 ½”) Sole length: 204mm (8”) Condition: plane has denting to sides and sole, infill is marked with previous woodworkers name stamps, wedge has a inden...